SCS (Formerly 3M Static Control)

SCS-ESD-EMC-EMI-Static Control for Critical Manufacturing

SCS is the leading manufacturer of ESD and static control items.  SCS is a leader in providing static control solutions to companies around the world.  Now, with the acquisitions of Credence Technologies and 3M's Electronic Solutions Division SCC offers turnkey solutions for ESD, EMI and EMC management.

Eliminating static electricity damage requires a complete SCC-static control program.  SCC static control provides a full range of packaging, workstation, and instrumentation product solutions and helps electronic products manufacturers develop and maintain complete ESD, EMI, EMI control programs.  

SCC ESD, EMI and EMI wrist straps,wrist bands, heel straps, toe straps. ESD table mats, ESD flooring, Esd field service kits, ionizers, testers, monitors, meters, and static shielding bag.

___________________________________________________________ 

New!

Is your ESD Program Working? Let us Verify it... 

Traditional ESD surveys have been around for years; measuring that individual static control products are within ANSI/ESD S20.20 requirements. These surveys are helpful in setting up a new ESD program however they are not keeping pace with the current demands in electronics manufacturing. The SCS EOS/ESD Assessment goes beyond the typical survey to help you identify and address both EOS and ESD problems. 

During an SCS EOS/ESD Assessment we provide quantifiable data to allow you to make improvements to your ESD process by sampling select areas in your facility, including automated insertion machines, soldering stations, shipping/receiving and more. The Assessment Report will include numeric findings, gaps between the program and industry standards ANSI/ESD S20.20 and IPC-A-610E, references to best practices, and recommendations for improvements. 

Examples of actual feedback from a SCS EOS/ ESD Assessment Report: 

• Two ESD events stronger than 50 volts CDM were observed at tool #5 
• An ESD event of 527 volts was detected at 2:23PM between the fluxer and wave solder machine 
• Bench 12 soldering iron is introducing more than 300mV of electrical overstress into the board,exceeding the recommended limit by IPC-A-610E 

Contact Practical Tools today for information about scheduling an SCS EOS/ESD Assessment of your facility at no charge. 

Call 866-434-7561 to speak with one of our knowledgable sales engineers today!