Hakko-BGA Rework System-FR1418-01
The Hakko BGA Rework System FR1418-01 SMD Rework System Single Zone Preheat (10X12"") Manual-Z w/ PC Control System from Practical Tool provides fast, efficient heating and eliminates board warping.
The Hakko BGA Rework System FR1418-01 BGA Rework System is constructed of heavy-walled aluminum castings for unsurpassed precision and stability and uses precisely controlled solder reflow profiles. The system features a unique gantry style construction similar to that of a pick-and-place machine, which allows the PCB to remain stationary while the head moves to accomplish the X, Y, Z and Theta alignment.
The Z-axis travel and component placement is manually controlled. The bottom heater is a single zone (10 x 12 inches) large area, low mass infra-red heater that provides fast, efficient heating and eliminates board warping.The Hakko FR-1418 BGA rework system is designed for the manual alignment and placement or removal of BGA, µBGA, CSP and other surface mount components with repeatable solder reflow profiles.
Hakko BGA Rework System FR1418-01
|Power Consumption||120 VAC, 15A|
|Preheater, low mass IR||750W Single Zone
254 x 305 mm (10 x 12 inch)
Proportional control 20-100%
|Top Heater, forced convection hot/gas||1000W|
|Dimensions||711 x 711 x 711 mm
(28 x 28 x 28 inch)
|Weight||57 kg (125 lbs.)|
|Supply Air||483 kPa (70 PSI) 5 CFM
1/8 inch NPT female inlet
3/8 inch (10mm) min.
Standard Accessories Pack
|2||222-510||Bottom IR Heater Lamp 500W|
|3||222-512||Type K 36 Ga. Thermocouple|
|1||222-513||Standard Vacuum Cup 0.28 Dia.|
|1||222-514||Optics Calibration Tip|
|1||222-515||Optics Calibration Plate|
|1||n/a||HMI Workstation CPU|
|1||n/a||Flat Panel Monitor for HMI Workstation|
|1||n/a||Video capture card for HMI Workstation