Hakko-Hot Air Station-FR802-11
ESD safe (Replaces the 850D) Process controllable. Use the lockout key card to enter temperature settings into the system memory, then when the card is removed, all parameter settings are locked into the system memory and cannot be changed without the key card. This feature guards against an operator making accidental or unauthorized temperature changes. Built-in power save feature automatically turns the hot air stream off if the unit has not been stopped for a pre-selected (30 or 60 minutes) amount of time
SPECIFICATIONS
Model | Hakko FR-802 |
Part Number | FR802-11 |
Station |
Total Power Consumption | 120V - 430W |
Station Power Consumption | 30W (Stand-by Mode: 4W) |
Handpiece Power Consumption | 430W |
Pump Type | Diaphragm pump |
Pump Capacity | 5 to 20 l/min. (max) |
Control Temperature* | 100 to 500°C (212 to 930°F) *measured at heater sensor |
Handpiece Length (w/o cord) |
200 (L) mm (7.8 in) |
Handpiece Weight (w/o cord) | 200 g (0.44 lb.) |
Outer Dimensions | 160(W) x 145(H) x 230(D) mm [6.3(W) x 5.7(H) x 9.1(D) in.] |
Weight | 4.3 kg (9.48 lbs.) |
Note: Specifications subject to change without notice Contents |
Name | Part Number | Quantity |
FR-802 Station | n/a | 1 |
Power cord | B2419 | 1 |
Handpiece holder | B3006 | 1 |
FP pickup w/ 1pc (S) & (L) |
B1438 | 1 |
Control card | B2972 | 1 |
Manual | n/a | 1 |
APPROVED |
Note: Station does not include nozzles. Nozzles must be purchased separately.
Some products sold through this website can expose you to chemicals including diisononyl Phthalate (DINP), which is known to the State of California to cause cancer (www.P65warnings.ca.gov).
Practical Tools?
Thanks! You have been subscribed to our newsletter.
Please enter your email address.